Lightning Audio LA-4200
il tuo prezzo: € 279,00
Prezzo riferito a singolo pezzo (IVA inclusa)
Fai una domanda sul prodotto
Tipologia Amplificatore
4 canali
Classe amplificatore
AB
Potenza RMS 4 Ohm
4x100 Watt
Potenza RMS 2 Ohm
4x150 Watt
Potenza RMS 3 Canali 4 Ohm
Watt
Potenza RMS 3 Canali 2 Ohm
Watt
Potenza RMS Dual Mono 4 Ohm
2x300 Watt
Potenza RMS Mono 2Ω
Watt
Ingresso Digitale S/PDIF
NO
Ingresso Alto Livello
NO
Rapporto segnale rumore
85 dB S/N
Distorsione armonica
% THD
Dimensione
419 x 58 x 238 mm
Lightning Audio LA-4200 amplificatore a 4 canali, classe AB, potenza RMS 4 x 1.600 Watt. Ingresso alto livello e basso livello.
RCA Pass-Thru Outputs
12dB Bass Boost
Adjustble 12dB/octave Crossover
Input Mode Switch
Built-In Fusing
Remote Bass Control
The Lightning Audio LA-4200 1,600 Watt amplifier can run an entire system with plenty of power! Run a 4-channel full-range speaker system on the amplifier or run full-range speakers on the front channels and subwoofers bridged on the rear channels. Featuring both hi-level or low-level inputs, bass boost, a selectable High-Pass or Low-Pass crossovers and RCA line outputs for daisy-chaining an additional amplifier, this amp does it all!
Specifiche LA-4200
| Number of Channels | 4 |
| Rated Power | 100 Watts x 4 @ 4-Ohms 150 Watts x 4 @ 2-Ohms 300 Watts x 2 @ 4-Ohms |
| Max Power | 200 Watts x 4 @ 4-Ohms 400 Watts x 4 @ 2-Ohms 800 Watts x 2 @ 4-Ohms |
| Bridgeable | Yes |
| Crossover Controls | CH1/CH2: 12dB/octave LP/BP-HP-FULL HP: 10Hz to 1.2kHz LP: 30Hz to 150Hz CH3/CH4: 12dB/octave LP/BP-HP-FULL HP: 10Hz to 1.2kHz LP: 30Hz to 150Hz |
| Tone Controls | Front: 0dB to +12dB @ 45Hz Rear: 0dB to +12dB @ 45Hz |
| Signal Input | Low-Level: 4 RCA (200mV to 4V) Input Switch: 4CH/2CH Twin Sub: off/on (synchonizes power supplies when bridging CH1/CH2 to woofer #1 and bridging CH3/CH4 to woofer #2 |
| Signal Output | Low-Level: (2) RCA Pass Thru |
| Power Input Connector | Block connector w/ set screw |
| Power Wire Gauge | 4 AWG |
| Speaker Output Connector | Block connector w/ set screw |
| Speaker Wire Gauge | 10 AWG |
| Heat Sink Type | Extruded aluminum |
| Cooling | Convection |
| Remote Control | Bass Boost (included) w/ integral Power LED & Protect LED |
| Visual Indicators | Power Protect |
| Circuit Topology Class | Class A/B |
| THD at Rated Power | <1.0 |
| Frequency Response | 20Hz - 20kHz |
| Signal-to-Noise Ratio | >85 dB |
| Shipping Weight | 13 Lbs. (5.9 Kg.) |
| Dimensions | L16.5" x W9.4" x H2.3" 41.9cm x 23.876cm x 5.8cm |
